Lucalen A2700M



Lucalen A2700M is a low density polyethylene, containing butyl acrylate comonomer. It exhibits low stiffness, low hardness and good impact properties at low temperature.
Lucalen A2700M is suitable for industrial applications where a combination of good processability and excellent softness is required. It is compatible with other Lucalen grades and is miscible with other ethylene copolymers, PE-LD, PE-HD and PE-LLD. The grade is available in natural pellet form.


Asia-Pacific, Europe


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 7.2 g/10 min
Density (23 °C, Method A) 0.924 g/cm³
Flexural Modulus 42 MPa
Tensile Stress at Break 11 MPa
Tensile Strain at Break > 800 %
Environmental Stress Crack Resistance > 1600 hr
Notched Izod Impact Strength (-40 °C) NB kJ/m²
Shore Hardness (Shore D) 30
Vicat Softening Temperature (A/50) 60 °C
Peak Melting Point 95 °C
Comonomer BA 17 %

Technical Data Sheet

Technical Data Sheet


Blown Film, Cast Film, Compounding, Compression Molding, Extrusion Flat-die, Injection Molding


Low Density Polyethylene


Geomembranes, Polymer Modifier, Single Ply Roofing, Soft Profile & Sheets, Specialty Film, TPO Foils and Skins, Wire & Cable