Lupolen 1800H

LyondellBasell

Description

Lupolen 1800 H is a low density polyethylene resin used in a wide range of processing methods such as injection molding, blow molding and film extrusion. It exhibits very good softness and toughness and good dimensional stability. Lupolen 1800 H is delivered in pellet form and is not additivated. Typical customer applications include caps & closures, lids, foams and champagne corks.

Lupolen 1800 H is not intended for use in medical and pharmaceutical applications.

Availability

Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, South & Central America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 1.5 g/10 min
Density 0.919 g/cm³
Tensile Modulus 200 MPa
Tensile Stress at Yield 9 MPa
Environmental Stress Crack Resistance F₅₀ 5 hr
Shore Hardness (Shore D) 45
Ball Indentation Hardness (H 49/30) 15 MPa
Vicat Softening Temperature (A/50 N) 91 °C
Melting Temperature 108 °C
Melt Temperature 180 - 230 °C

Technical Data Sheet

Technical Data Sheet

Process

Blown Film, Extrusion Blow Molding, Injection Molding


Resin

Low Density Polyethylene


Applications

Bottles For Consumer Goods, Caps & Closures, Sports, Leisure & Toys