Lupolen 1840D
Description
Lupolen 1840 D is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading
to a good bubble stability during blown film extrusion. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
Availability
Europe
Product data and technical information
Typical Properties
Melt Flow Rate (190 °C/2.16 kg)
0.25 g/10 min
Density
0.919 g/cm³
Tensile Modulus
200 MPa
Tensile Stress at Yield
9 MPa
Dart Drop Impact Strength, F50
280 g
Tensile Strength MD
27 MPa
Tensile Strength TD
25 MPa
Tensile Strain at Break MD
200 %
Tensile Strain at Break TD
500 %
Coefficient of Friction
>0.8
Failure Energy
6.5 J/mm
Vicat Softening Temperature (A/50)
93 °C
Peak Melting Point
108 °C
Haze (50 µm)
<15 %
Gloss (20°)
>10
Gloss (60°)
>50