Lupolen 2420 F PLUS is a non-additivated, low density polyethylene. This grade is characterized by a very low gel level. Typical customer applications are surface protection films or other higher value film applications where a very low gel content is required . It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
Lupolen 2420F PLUS
Description
Availability
Africa-Middle East, Asia-Pacific, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 0.75 g/10 min |
| Density | 0.923 g/cm³ |
| Tensile Modulus | 260 MPa |
| Tensile Stress at Yield | 11 MPa |
| Dart Drop Impact Strength, F50 | 150 g |
| Tensile Strength MD | 26 MPa |
| Tensile Strength TD | 24 MPa |
| Tensile Strain at Break MD | 300 % |
| Tensile Strain at Break TD | 600 % |
| Coefficient of Friction | >0.8 |
| Failure Energy | 5.5 J/mm |
| Vicat Softening Temperature (A/50) | 96 °C |
| Peak Melting Point | 111 °C |
| Haze (50 µm) | <8 % |
| Gloss (20°) | >40 |
| Gloss (60°) | >90 |
Technical Data Sheet
Technical Data SheetProcess
Blown Film
Resin
Low Density Polyethylene
Applications
Bags & Pouches, Food Packaging Film, Hygiene Film, Liner Film, Shrink Film, Surface Protection Film