Lupolen 2420F
Description
Lupolen 2420 F is a non-additivated, low density polyethylene. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
Availability
Africa-Middle East, Asia-Pacific, Europe
Product data and technical information
Typical Properties
Melt Flow Rate (190 °C/2.16 kg)
0.75 g/10 min
Density
0.923 g/cm³
Tensile Modulus
260 MPa
Tensile Stress at Yield
11 MPa
Dart Drop Impact Strength, F50
150 g
Tensile Strength MD
26 MPa
Tensile Strength TD
24 MPa
Tensile Strain at Break MD
300 %
Tensile Strain at Break TD
600 %
Coefficient of Friction
>0.8
Failure Energy
5.5 J/mm
Vicat Softening Temperature (A/50)
96 °C
Peak Melting Point
111 °C
Haze (50 µm)
<8 %
Gloss (20°)
>40
Gloss (60°)
>90