Lupolen 2420 K is a non-additivated, low density polyethylene. It is characterized by a good processability.
Films made from Lupolen 2420 K exhibit good optical properties. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
Lupolen 2420K
Description
Availability
Africa-Middle East, Asia-Pacific, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 4.0 g/10 min |
| Density | 0.924 g/cm³ |
| Tensile Modulus | 260 MPa |
| Tensile Stress at Yield | 11 MPa |
| Dart Drop Impact Strength, F50 | 100 g |
| Tensile Strength MD | 22 MPa |
| Tensile Strength TD | 17 MPa |
| Tensile Strain at Break MD | 300 % |
| Tensile Strain at Break TD | 600 % |
| Coefficient of Friction | >0.7 |
| Failure Energy | 3.5 J/mm |
| Vicat Softening Temperature (A/50) | 92 °C |
| Peak Melting Point | 111 °C |
| Haze (50 µm) | <8 % |
| Gloss (20°) | >60 |
| Gloss (60°) | >105 |
Technical Data Sheet
Technical Data SheetProcess
Blown Film, Cast Film, Extrusion Coating, Injection Molding
Resin
Low Density Polyethylene
Applications
Coatings, Protective, Food Packaging Film, Hygiene Film, Shrink Film, Surface Protection Film