Lupolen 2426 H is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is
characterized by a good balance between processability and mechanical properties. Films made from
Lupolen 2426 H exhibit good optical properties. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
Lupolen 2426H
Description
Availability
Africa-Middle East, Asia-Pacific, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 1.9 g/10 min |
| Density | 0.924 g/cm³ |
| Tensile Modulus | 260 MPa |
| Tensile Stress at Yield | 11 MPa |
| Dart Drop Impact Strength, F50 | 110 g |
| Tensile Strength MD | 25 MPa |
| Tensile Strength TD | 21 MPa |
| Tensile Strain at Break MD | 250 % |
| Tensile Strain at Break TD | 600 % |
| Coefficient of Friction | <0.2 |
| Failure Energy | 4 J/mm |
| Vicat Softening Temperature (A/50) | 94 °C |
| Peak Melting Point | 111 °C |
| Haze (50 µm) | <8 % |
| Gloss (20°) | >50 |
| Gloss (60°) | >100 |
| Slip Erucamide | 500 ppm |
| Antiblock Natural Silica | 1000 ppm |
Technical Data Sheet
Technical Data SheetProcess
Blown Film, Cast Film
Resin
Low Density Polyethylene
Applications
Bags & Pouches, Food Packaging Film, Hygiene Film, Liner Film, Shrink Film