Lupolen 3426J
Description
Lupolen 3426 J is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is
characterized by a good processability and high stiffness. LyondellBasell customers report that Lupolen 3426 J is used in hygiene film and that films made from Lupolen 3426 J exhibit a glossy surface finish. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
Availability
Europe
Product data and technical information
Typical Properties
Melt Flow Rate (190 °C/2.16 kg)
3.0 g/10 min
Density
0.934 g/cm³
Tensile Modulus
480 MPa
Tensile Stress at Yield
16 MPa
Dart Drop Impact Strength, F50
90 g
Tensile Strength MD
19 MPa
Tensile Strength TD
16 MPa
Tensile Strain at Break MD
450 %
Tensile Strain at Break TD
600 %
Coefficient of Friction
<0.2
Failure Energy
3 J/mm
Vicat Softening Temperature (A/50)
109 °C
Peak Melting Point
119 °C
Haze (50 µm)
<10 %
Gloss (20°)
>75
Gloss (60°)
>110
Slip Erucamide
650 ppm
Antiblock Natural Silica
550 ppm