Purell PE 2420 F



Purell PE 2420F is a high purity low density polyethylene with good processability, good opticals and good chemical resistance. It is delivered in pellet form.

The grade is used by our customers for films for healthcare applications including packaging of pharmaceuticals.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.75 g/10 min
Density 0.923 g/cm³
Tensile Modulus 260 MPa
Tensile Stress at Yield 11 MPa
Tensile Strength MD 26 MPa
Tensile Strength TD 20 MPa
Tensile Strain at Break MD 300 %
Tensile Strain at Break TD 600 %
Shore Hardness (Shore D) 48
Ball Indentation Hardness (H 49/30) 18.0 MPa
Vicat Softening Temperature (A/50) 96 °C
Peak Melting Point 111 °C

Technical Data Sheet

Technical Data Sheet


Blow, Fill, & Seal, Blown Film, Extrusion Blow Molding, Injection Blow Molding


Low Density Polyethylene


Bags & Pouches, Blow-Fill-Seal Applications, Healthcare Applications, Medical Devices, Medical Film, Secondary Packaging