Purell PE 3220D



Purell PE 3220D is a low density polyethylene with high rigidity and good chemical resistance. It is delivered in pellet form. The grade is used by our customers for packaging of pharmaceuticals in the small blow moulding market such as in blow fill seal technology.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.40 g/10 min
Density 0.930 g/cm³
Bulk Density >0.500 g/cm³
Tensile Modulus 430 MPa
Tensile Stress at Yield 13.0 MPa
Tensile Strain at Yield 12.2 %
Shore Hardness (Shore D) 54
Vicat Softening Temperature (A50) 110 °C
Peak Melting Point 117 °C


Blow, Fill, & Seal, Blown Film, Extrusion Blow Molding, Injection Molding


Low Density Polyethylene


Blow-Fill-Seal Applications, Bottles and Vials, Caps & Closures (Healthcare), Healthcare Applications, Medical Devices, Medical Film