Moplen EP310D HP is a low fluidity polypropylene heterophasic copolymer. It does not contain anti-blocking and slip additives.
Moplen EP310D HP is typically used by customers for extrusion applications when high mechanical properties are of the utmost importance. It is normally extruded by customers in single layer film for lamination on other substrates, obtaining structures that can be processed under high retorting conditions. This grade has been reported to be used in some other typical applications, such as extruded film for adhesive tapes, lamination film, freezer film, pipes, fittings and containers produced by extrusion blow molding. Customers also reported that can be used as a building block for heavy duty bags, delivering high impact and thermal resistance over a broad range of temperatures.
Moplen EP310D HP has been reported by customers to exhibit high impact, good puncture, good tear resistance, high seal strength and seal integrity.
Moplen EP310D HP
Description
Availability
Africa-Middle East, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 0.95 g/10 min |
| Density | 0.90 g/cm³ |
| Flexural Modulus | 1080 MPa |
| Tensile Stress at Break | 31 MPa |
| Tensile Stress at Yield | 26 MPa |
| Tensile Strain at Break | >500 % |
| Tensile Strain at Yield | 14 % |
| Charpy Impact Strength - Notched (23 °C) | 50 kJ/m² |
| Charpy Impact Strength - Notched (-20 °C) | 5 kJ/m² |
| Vicat Softening Temperature (A/50) | 152 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 83 °C |
Technical Data Sheet
Technical Data SheetProcess
Blown Film, Cast Film, Extrusion Blow Molding, Pipe
Resin
Polypropylene, Impact Copolymer
Applications
Containers, Food Packaging Film, Heavy Duty Packaging, Lamination Film, Surface Protection Film