Adflex Q 200 F



Adflex Q 200 F is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. Adflex Q 200 F features a fractional melt flow and a low modulus. It is selected by customers for use in extrusion applications. This resin is ideal for making soft hygienic or heavy duty films. It can also be used to modify LDPE or LLDPE resins in order to improve puncture resistance and other mechanical characteristics to allow futher downgauging. It contains no slip or antiblock. This grade is available in natural pellet form.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 0.8 g/10 min
Density (23 °C, Method A) 0.88 g/cm³
Flexural Modulus 150 MPa
Tensile Stress at Break 13 MPa
Tensile Strain at Break 500 %
Shore Hardness (Shore D, 15 sec) 35
Heat Deflection Temperature B (0.45 MPa, Unannealed) 44 °C
DSC Melting Point 163 °C

Technical Data Sheet

Technical Data Sheet


Blown Film, Calendaring, Extrusion Blow Molding, Sheet and Profile Extrusion




Cured in Place Pipe, Interior Automotive Applications, Soft Profile & Sheets, Specialty Film, TPO Foils and Skins