Adflex Q 300 F



Adflex Q 300 F is a thermoplastic polyolefin which has been developed for the extrusion or calendering of soft film. Adflex Q 300 F can also be used as impact/toughener modifier of polypropylene homopolymer in extrusion applications. In strapping applications for instance, it notably decreases fibrillation and improves the processability of the film at high drawing ratios. Adflex Q 300 F can be processed on any conventional PP extrusion line as well as on PVC calendars. It can also be blown on standard LDPE or LLDPE film lines.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 0.8 g/10 min
Density (23 °C, Method A) 0.88 g/cm³
Flexural Modulus 330 MPa
Tensile Stress at Break 13 MPa
Tensile Stress at Yield 9 MPa
Tensile Strain at Break 550 %
Tensile Strain at Yield 35 %
Charpy Impact Strength - Notched (23 °C) 70 kJ/m²
Charpy Impact Strength - Notched (-20 °C) 100 kJ/m²
Charpy Impact Strength - Notched (-40 °C) 100 kJ/m²
Shore Hardness (Shore D) 36
Vicat Softening Temperature (A50) 78 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 50 °C
Melting Temperature 163 °C

Technical Data Sheet

Technical Data Sheet


Blown Film, Extrusion Blow Molding, Sheet and Profile Extrusion




Agriculture Film, Bags & Pouches, Bottles For Consumer Goods, Bottles for Industrial Use, Collapsible Tubes, Film Wrap, Heavy Duty Packaging, Hygiene Film, Lamination Film, Peelable Film, Surface Protection Film