Adflex X 500 F



Adflex X 500 F is a thermoplastic polyolefin which is typically used in co-extruded cast film and injection moulding applications. Adflex X 500 F features a high softness, a low modulus, high gloss and excellent clarity. It has been selected by customers for use in a central layer of tough transparent co-extruded cast-film structures. It can be blended with other transparent polyolefinic resins to improve the low temperature impact resistance maintaining the transparency of the film. Adflex X 500 F can be processed on conventional PP cast film lines. It is also suited for injection moulding applications where high transparency and good gloss combined with good flexibility is required like e.g. housewares and toys. It does not contain any slip nor anti-blocking agents.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 7.5 g/10 min
Density (23 °C, Method A) 0.89 g/cm³
Flexural Modulus 550 MPa
Tensile Stress at Break 22 MPa
Tensile Strain at Break 700 %
Shore Hardness (Shore D, 15 sec) 46
Heat Deflection Temperature B (0.45 MPa, Unannealed) 58 °C
DSC Melting Point 163 °C

Technical Data Sheet

Technical Data Sheet


Cast Film, Extrusion Coating, Injection Molding




Bags & Pouches, Breathable Film, Clear Containers, Food Packaging Film, Hygiene Film, Lamination Film, Stationery Film