Adstif HA801U



Adstif HA801U very high melt flow, nucleated polypropylene homopolymer is available in pellet form.  This resin is typically used in high-speed injection molding of thin-walled parts, and as a building block for compounded applications that require high flow and high stiffness.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 65 g/10 min
Density (23 °C) 0.90 g/cm³
Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) 290000 psi
Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) 2000 MPa
Tensile Strength at Yield (2 in/min) 6100 psi
Tensile Strength at Yield (50 mm/min) 42 MPa
Tensile Elongation at Yield 6 %
Notched Izod Impact Strength (73 °F, Method A) 0.3 ft-lb/in
Notched Izod Impact Strength (23 °C, Method A) 16 J/m
Deflection Temperature Under Load (66 psi, Unannealed) 270 °F
Deflection Temperature Under Load (0.45 MPa, Unannealed) 132 °C

Technical Data Sheet

Technical Data Sheet - ASTM


Compounding, Injection Molding


Polypropylene, Homopolymer


Colour Concentrates, Polymer Modifier, TWIM Food Containers