Adstif HA802H



Adstif HA802H polypropylene is available in pellet form.  This resin is typically used in film, thermoforming and compounding applications requiring high stiffness and high temperature resistance.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 2.3 g/10 min
Density (23 °C) 0.90 g/cm³
Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) 275000 psi
Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) 1900 MPa
Tensile Strength at Yield (2 in/min) 5400 psi
Tensile Strength at Yield (50 mm/min) 37 MPa
Tensile Elongation at Yield 8 %
Notched Izod Impact Strength (73 °F, Method A) 0.7 ft-lb/in
Notched Izod Impact Strength (23 °C, Method A) 37 J/m
Deflection Temperature Under Load (66 psi, Unannealed) 219 °F
Deflection Temperature Under Load (0.45 MPa, Unannealed) 104 °C

Technical Data Sheet

Technical Data Sheet - ASTM


BOPP, Compounding, Thermoforming


Polypropylene, Homopolymer


Containers, Specialty Film