CirculenRecover HD5603 Silver



CirculenRecover HD5603 Silver is a circular high density polyethylene grade supplied in pellet form for blow molding and extrusion applications. This grade is characterized by its easy processability.

According with the requirements of Standard ISO 14021:2016, CirculenRecover HD5603 Silver contains at least 98% of recycled material that is fully based on Post-Consumer Waste (PCW) from pre-sorted municipal plastic waste. Filtration level is 150 µm. Volatiles according to ASTM D6980 @ 120 °C are < 0.2%. Based on CIELab values, the color indication is close to RAL 7012.

This product is not intended for highly regulated applications including food contact, potable water contact,
medical and pharmaceutical applications.




SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.40 g/10 min
Melt Flow Rate (190 °C/5.0 kg) 1.8 g/10 min
Density 0.956 g/cm³
Bulk Density >0.500 g/cm³
Tensile Modulus 1200 MPa
Tensile Stress at Yield 24 MPa
Tensile Strain at Yield 9 %
FNCT (6.0 MPa, 2% Arkopal N100, 50 °C) 8 hr
Charpy Impact Strength - Unnotched (-30 °C) 2.5 kJ/m²
Ash < 2 wt %
Melt Temperature 180 - 210 °C

Technical Data Sheet

Technical Data Sheet


Extrusion Blow Molding, Sheet and Profile Extrusion


High Density Polyethylene


Bottles For Consumer Goods, Bottles for Industrial Use, General Sheet Extrusion