CirculenRenew C14 EP348U



CirculenRenew C14 EP348U is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).

CirculenRenew C14 EP348U is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.

CirculenRenew C14 EP348U is a nucleated, antistatic formulated, very high flow impact copolymer suitable for thin-walled injection molding applications.
CirculenRenew C14 EP348U combines an excellent processability with a very good impact strength at low temperature.
CirculenRenew C14 EP348U is typically used by customers for margarine tubs, packaging for dairy products, ice cream containers, lids, caps, housewares, toy boxes, flower pots and laundry baskets


Africa-Middle East, Europe


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 70 g/10 min
Density (23 °C) 0.90 g/cm³
Tensile Modulus 1200 MPa
Tensile Stress at Yield 24 MPa
Tensile Strain at Break 50 %
Tensile Strain at Yield 4 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 5.5 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) 4 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 3.2 kJ/m²
Ductile/Brittle Transition Temperature -45 °C
Ball Indentation Hardness (H 358/30) 50 MPa
Vicat Softening Temperature (A/50) 150 °C
Vicat Softening Temperature (B50) 65 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 92 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


Polypropylene, Impact Copolymer


Caps & Closures, Housewares, Opaque Containers