CirculenRenew C14 EP448T



CirculenRenew C14 EP448T is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).

CirculenRenew C14 EP448T is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.

CirculenRenew C14 EP448T is a nucleated heterophasic copolymer with antistatic additivation used in injection moulding applications.
CirculenRenew C14 EP448T has a high flow, good impact/stiffness balance.
CirculenRenew C14 EP448T is typically used by customers in opaque containers, housewares, toys and closures.


Africa-Middle East, Europe


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 48 g/10 min
Density (23 °C) 0.90 g/cm³
Tensile Modulus 1250 MPa
Tensile Stress at Yield 27 MPa
Tensile Strain at Break %
Tensile Strain at Yield 5 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 5 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) 3.5 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 2.5 kJ/m²
Vicat Softening Temperature (A50) 151 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 90 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


Polypropylene, Impact Copolymer


Caps & Closures, Housewares, Opaque Containers, Sports, Leisure & Toys