CirculenRenew C14 LD2420K

LyondellBasell

Description

CirculenRenew C14 LD2420 K is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).

CirculenRenew C14 LD2420 K is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.
CirculenRenew C14 LD2420 K is a non-additivated, low density polyethylene. It is characterized by a good processability. Films made from CirculenRenew C14 LD2420 K exhibit good optical properties. It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.

Availability

Africa-Middle East, Asia-Pacific, Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 4.0 g/10 min
Density 0.924 g/cm³
Tensile Modulus 260 MPa
Tensile Stress at Yield 11 MPa
Dart Drop Impact Strength, F50 100 g
Tensile Strength MD 22 MPa
Tensile Strength TD 17 MPa
Tensile Strain at Break MD 300 %
Tensile Strain at Break TD 600 %
Coefficient of Friction >0.7
Failure Energy 3.5 J/mm
Vicat Softening Temperature (A/50 N) 92 °C
Peak Melting Point 111 °C
Haze (50 µm) <8 %
Gloss (20°) >60
Gloss (60°) >105

Technical Data Sheet

Technical Data Sheet

Process

Blown Film, Cast Film, Extrusion Coating, Injection Molding


Resin

Low Density Polyethylene


Applications

Coatings, Protective, Food Packaging Film, Hygiene Film, Shrink Film, Surface Protection Film