CirculenRenew C14 LD3020F

LyondellBasell

Description

CirculenRenew C14 LD3020 F is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).

CirculenRenew C14 LD3020 F is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.
CirculenRenew C14 LD3020 F is a non-additivated, low density polyethylene. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from CirculenRenew C14 LD3020 F exhibit a good shrinkage performance.
CirculenRenew C14 LD3020 F provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.

Availability

Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.9 g/10 min
Density 0.927 g/cm³
Tensile Modulus 300 MPa
Tensile Stress at Yield 12 MPa
Dart Drop Impact Strength, F50 120 g
Tensile Strength MD 27 MPa
Tensile Strength TD 22 MPa
Tensile Strain at Break MD 300 %
Tensile Strain at Break TD 600 %
Coefficient of Friction >0.8
Failure Energy 4 J/mm
Vicat Softening Temperature (A/50 N) 100 °C
Peak Melting Point 114 °C
Haze (50 µm) <7 %
Gloss (20°) >50
Gloss (60°) >100

Technical Data Sheet

Technical Data Sheet

Process

Blown Film


Resin

Low Density Polyethylene


Applications

Bags & Pouches, Food Packaging Film, Lamination Film, Shrink Film, Surface Protection Film