CirculenRenew C14 LD3020K



CirculenRenew C14 LD3020 K is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).

CirculenRenew C14 LD3020 K is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.
CirculenRenew C14 LD3020 K is a non-additivated, low density polyethylene. It is characterized by a good processability. LyondellBasell customers report that films made from CirculenRenew C14 LD3020 K exhibit a glossy surface finish. CirculenRenew C14 LD3020 K provides the option to produce films with very good optical properties. It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.




SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 4.0 g/10 min
Density 0.928 g/cm³
Tensile Modulus 300 MPa
Tensile Stress at Yield 13 MPa
Dart Drop Impact Strength, F50 90 g
Tensile Strength MD 20 MPa
Tensile Strength TD 17 MPa
Tensile Strain at Break MD 350 %
Tensile Strain at Break TD 600 %
Coefficient of Friction >0.8
Failure Energy 3.5 J/mm
Vicat Softening Temperature (A/50) 97 °C
Peak Melting Point 114 °C
Haze (50 µm) <7 %
Gloss (20°) >80
Gloss (60°) >115

Technical Data Sheet

Technical Data Sheet


Blown Film, Cast Film, Injection Molding


Low Density Polyethylene


Food Packaging Film, Lamination Film, Shrink Film, Surface Protection Film