Dexflex 815 XXX

LyondellBasell

Description

Dexflex 815 XXX is a thermoplastic olefinic elastomer (TPO) is typically used for exterior automotive applications that require a combination of stiffness, low-temperature impact resistance and excellent processability.

Availability

North America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 20 g/10 min
Density (23 °C) 0.92 g/cm³
Flexural Modulus (23 °C, 2 mm/min) 1050 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 20 MPa
Multi-axial Impact Strength (23° C, 2.2 m/s, 3.2 mm plaque) 17 J
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet - ISO

Process

Injection Molding


Resin

Polypropylene Compounds


Applications

Automotive Parts, Bumpers, Exterior Automotive Applications


Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications