Hifax CA 387 A



Hifax CA 387 A is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. It has high melt flow and an excellent balance of impact, stiffness, processability and paintability. Hifax CA 387 A is primarily used for painted automotive bumper fascias that require high durability, and for other injection molded parts with paintable and weatherable requirements. It is also utilized as a component in compounded materials for a wide range of industrial applications. The grade is available in natural pellet form.


North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 18.5 g/10 min
Density (23 °C, Method A) 0.89 g/cm³
Flexural Modulus 1000 MPa
Tensile Strain at Break 110 %
Shore Hardness (Shore D, 15 sec) 52
Heat Deflection Temperature B (0.45 MPa, Unannealed) 80 °C
DSC Melting Point 163 °C

Technical Data Sheet

Technical Data Sheet


Compounding, Injection Molding




Bumpers, Caps & Closures, Exterior Automotive Applications, Interior Automotive Applications, Polymer Modifier

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications