Hifax CB 237 G is a 15% talc filled elastomer modified PP, with good flowability, excellent impact/stiffness balance and good UV resistance.
Hifax CB 237 G 1312
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 14 g/10 min |
| Density (23 °C) | 1.01 g/cm³ |
| Flexural Modulus (23 °C, Tech. A) | 1700 MPa |
| Tensile Stress at Yield (23 °C) | 18 MPa |
| Charpy Impact Strength - Notched (23 °C) | 20 kJ/m² |
| Charpy Impact Strength - Notched (0 °C) | 7 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Exterior Trim
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications