Hifax TRS 123D NAT

Description

Hifax TRS 123D NAT medium melt flow, 1000 MPa flexural modulus, natural, reactor grade thermoplastic elastomeric olefin (TEO) resin has an excellent balance of impact, stiffness, paintability, and processability that is typically used for all-terrain vehicle (ATV) components. It is based on material produced from LyondellBasell’s proprietary Catalloy process.

Availability

North America

Product data and technical information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 17 g/10 min

Density (23 °C, Method A) 0.89 g/cm³

Flexural Modulus (23 °C) 1000 MPa

Tensile Stress at Yield (23 °C) 18 MPa

Tensile Strain at Yield (23 °C) 8 %

Gardner Impact (-30 °C, Geometry GC) 225 in-lbs

Multi-axial Impact Strength (-30 °C, 2.2 m/s, 3.2 mm plaque) 25 J

Mold Shrinkage

Technical Data Sheet Technical Data Sheet

Safety Data Sheet Safety Data Sheet- Global

Technical Literature Catalloy TPO Resins Brochure (EU).pdf

Product Selection Guide – Catalloy TPO Resins (EAI)

Miscellaneous Catalloy TPO Resins Shine in Photovoltaic Backsheet from RENOLIT.pdf

Marketing Polypropylene

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications