Hostacom 6551 WHT conventional melt flow, 1,300 MPa flexural modulus, precolored polypropylene homopolymer has a good combination of strength, stiffness, impact and heat resistance. It is typically used for a variety of industrial and consumer applications.
Hostacom 6551 WHT
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 4 g/10 min |
| Density (23 °C) | 0.94 g/cm³ |
| Flexural Modulus | 1300 MPa |
| Tensile Strength at Break | 14 MPa |
| Tensile Strength at Yield | 34 MPa |
| Tensile Elongation at Break | 350 % |
| Tensile Elongation at Yield | 7 % |
| Notched Izod Impact Strength (23 °C) | 53 J/m |
| Rockwell Hardness (R-Scale) | 98 |
| Deflection Temperature Under Load (66 psi, Unannealed) | 81 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Industrial
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications