Hostacom BE17FC BLK fractional melt flow, 1,800 MPa flexural modulus, UV stabilized, precolored, 40% calcium carbonate filled polypropylene copolymer is typically used for a variety of extrusion and blow molding applications. It is characterized by an excellent overall balance of properties.
Hostacom BE17FC BLK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 0.4 g/10 min |
| Density (23 °C) | 1.23 g/cm³ |
| Flexural Modulus | 1800 MPa |
| Tear Strength | 130 kN/m |
| Tensile Strength at Break | 21 MPa |
| Tensile Strength at Yield | 27 MPa |
| Tensile Elongation at Break | 280 % |
| Tensile Elongation at Yield | 10 % |
| Notched Izod Impact Strength (23 °C) | 350 J/m |
| Rockwell Hardness (R-Scale) | 84 |
| Durometer Hardness (D Scale) | 74 |
| Deflection Temperature Under Load (66 psi, Unannealed) | 78 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Extrusion Blow Molding, Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Exterior Automotive Applications, Underhood
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications