Hostacom ERG 393F BLACK is a 20% glass fiber reinforced PP copolymer, with good stiffness and good impact resistance. Material provides high melt strength, good melt elongational behavior and is tailor-made for foam injection molding. This product is also available in other colors, new colors can be developed depending on customer requirements.
Hostacom ERG 393F BLACK
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 22 g/10 min |
| Melt Volume Flow Rate (230 °C/2.16 kg) | 26 cm³/10 min |
| Density (23 °C) | 1.05 g/cm³ |
| Flexural Modulus (23 °C, Tech. A) | 4400 MPa |
| Tensile Modulus (23 °C) | 4500 MPa |
| Tensile Stress at Break (23 °C) | 70 MPa |
| Tensile Strain at Break (23 °C) | 3 % |
| Charpy Impact Strength - Notched (23 °C) | 13 kJ/m² |
| Heat Deflection Temperature A (1.80 MPa, Unannealed) | 140 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Underhood
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications