Hostacom PPN 4160 is an unfilled PP homopolymer with low melt flow rate.
Product is UL listed.
Hostacom PPN 4160
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 2.5 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Flexural Modulus (23 °C, Tech. A) | 1500 MPa |
| Tensile Modulus (23 °C) | 1450 MPa |
| Tensile Stress at Yield (23 °C) | 36 MPa |
| Tensile Strain at Yield (23 °C) | 8 % |
| Charpy Impact Strength - Notched (23 °C) | 4.5 kJ/m² |
| Charpy Impact Strength - Unnotched (23 °C) | No Break kJ/m² |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 55 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications