Hostacom TKC 406P NAT



Hostacom TKC 406P NAT is a mineral filled elastomer modified PP with medium melt flow rate. It combines excellent stiffness / impact balance, good scratch resistance and high UV stability with good flowability and high dimensional stability.




SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 12 g/10 min
Density (23 °C) 1.07 g/cm³
Tensile Modulus (23 °C) 2000 MPa
Tensile Stress at Yield (23 °C) 22 MPa
Tensile Strain at Yield (23 °C) 5.5 %
Charpy Impact Strength - Notched (23 °C) 16 kJ/m²
Charpy Impact Strength - Notched (-30 °C) 2.5 kJ/m²
Vicat Softening Temperature (B50) 50 °C
Deflection Temperature Under Load (0.45 MPa, Unannealed) 95 °C
Deflection Temperature Under Load (1.80 MPa, Unannealed) 55 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


Polypropylene Compounds


Outdoor and Power Tools

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications