Hostacom TRG 436P NAT is a glass fiber reinforced impact modified PP with medium melt flow rate. It combines a well-balanced impact/stiffness ratio with good surface and high UV stability for applications requiring high ductility also at low temperatures.
Hostacom TRG 436P NAT
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 13 g/10 min |
| Melt Volume Flow Rate (230 °C/2.16 kg) | 13 cm³/10 min |
| Density (23 °C) | 1.21 g/cm³ |
| Flexural Modulus (23 °C, Tech. A) | 7500 MPa |
| Tensile Modulus (23 °C) | 8000 MPa |
| Tensile Stress at Yield (23 °C) | 85 MPa |
| Tensile Strain at Yield (23 °C) | 3 % |
| Charpy Impact Strength - Notched (23 °C) | 12 kJ/m² |
| Charpy Impact Strength - Notched (0 °C) | 10 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C) | 10 kJ/m² |
| Charpy Impact Strength - Unnotched (23 °C) | 55 kJ/m² |
| Charpy Impact Strength - Unnotched (0 °C) | 55 kJ/m² |
| Vicat Softening Temperature (B50) | 110 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 140 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Exterior Automotive Applications, Outdoor and Power Tools
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications