Hostalen ACP 9240 PLUS



Hostalen ACP 9240 Plus is a high density polyethylene characterised by superior toughness and stiffness. Hostalen ACP 9240 Plus can be converted on HDPE blown film equipment with a homogeneous appearance and very low gel level. The very good bubble stability permits the production of wrinkle free and flat films within a wide range of blow up ratios. Typical applications are carrier and meat bags, inliners for drums, paper bags and FIBC as well as heavy duty bags. This product is not intended for use in medical and pharmaceutical applications.




SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/5.0 kg) 0.20 g/10 min
Melt Flow Rate (190 °C/21.6 kg) 6.0 g/10 min
Density 0.946 g/cm³
Tensile Modulus 900 MPa
Tensile Stress at Yield 23 MPa
Dart Drop Impact Strength >300 g
Tensile Strength MD 80 MPa
Tensile Strength TD 65 MPa
Tensile Strain at Break MD 350 %
Tensile Strain at Break TD 400 %
Vicat Softening Temperature (B50) 72 °C
Peak Melting Point 129 °C

Technical Data Sheet

Technical Data Sheet


Blown Film, Sheet


High Density Polyethylene


Bags & Pouches, Food Packaging Film, Heavy Duty Packaging, Industrial Packaging, Lamination Film, Liner Film, Products for Use in Property Modification