Hostalen CRP 100 RESIST CR orange



Hostalen CRP 100 RESIST CR orange is a high density polyethylene (HDPE), orange colored similar RAL 1033 with high melt viscosity for extrusion, injection and compression molding. The compound fulfills the material requirements of EN 1555-1 and ISO 4437-1. The product is additionally classified as PE 100-RC and provides a very good long term hydrostatic strength. Especially developed for non-conventional pipe installations methods the product has a superior resistance to slow crack growth.
It fulfills the material requirements of PAS 1075:2009-04.
Designation according ISO 1872-1: PE,EACHL,50-T003


Asia-Pacific, Australia and New Zealand, Europe, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/5.0 kg) 0.27 g/10 min
Melt Flow Rate (190 °C/21.6 kg) 7.3 g/10 min
Density 0.950 g/cm³
Flexural Creep Modulus (4-point loading / 2000 hr) 330 MPa
Tensile Modulus (23 °C) 1050 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 23 MPa
Tensile Strain at Yield (23 °C, 50 mm/min) 9 %
MRS Classification 10 MPa
FNCT (4.0 MPa, 2% Arkopal N100, 80 °C) >=8760 hr
Charpy Impact Strength - Notched (23 °C) 26 kJ/m²
Charpy Impact Strength - Notched (-30 °C) 13 kJ/m²
Shore Hardness (Shore D, 3 sec) 62
Vicat Softening Temperature (B50) 74 °C
Oxidation Induction Time (210 °C) 30 min

Technical Data Sheet

Technical Data Sheet




High Density Polyethylene


Gas Pipe