Hostalen GM 5010 T3 BLACK



Hostalen GM 5010 T3 black is a high density polyethylene (HDPE), black colored similar RAL 9004 with high melt viscosity for extrusion, injection and compression moulding. The product is classified as PE 80 and provides excellent stress crack resistance properties (ESCR) combined with very good long term hydrostatic strength.


Asia-Pacific, Australia and New Zealand, Europe, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/5.0 kg) 0.43 g/10 min
Melt Flow Rate (190 °C/21.6 kg) 9.0 g/10 min
Density 0.957 g/cm³
Tensile Modulus (23 °C) 1050 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 22 MPa
Tensile Strain at Break (23 °C) >=350 %
Tensile Strain at Yield (23 °C, 50 mm/min) 8 %
MRS Classification 8 MPa
FNCT (4.0 MPa, 2% Arkopal N100, 80 °C) >=100 hr
Charpy Impact Strength - Notched (23 °C) 24 kJ/m²
Charpy Impact Strength - Notched (-30 °C) 8 kJ/m²
Shore Hardness (Shore D, 3 sec) 59
Vicat Softening Temperature (B50) 70 °C
Oxidation Induction Time (210 °C) 30 min
Carbon Black Content 2.25 %

Technical Data Sheet

Technical Data Sheet


Compression Molding, Pipe, Sheet


High Density Polyethylene


Drinking Water Pipe, Gas Pipe, Industrial, Soil & Waste Pipe