Lucalen G3710E



Lucalen G3710E is a maleic anhydride grafted polyethylene resin with a high thermal stability and good flexibility.
Lucalen G3710E is primarily designed to be used as the adhesive layer between the top coat polyethylene and the epoxy layer in a 3-layer coating system with easy processing charcteristics. Lucalen G3710E is available in pellet form.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 1.5 g/10 min
Density 0.931 g/cm³
Bulk Density > 0.5 g/cm³
Tensile Modulus 400 MPa
Tensile Stress at Yield 12.0 MPa
Tensile Strain at Break > 700 %
Water Content <=0.1 %
Shore Hardness (Shore D) 51
Vicat Softening Temperature (A/50) >= 100 °C
Low Temperature Brittleness < -70 °C
Peak Melting Point 125 °C
Peel Strength (23 °C) > 200 N/cm
Peel Strength (80 °C) > 40 N/cm

Technical Data Sheet

Technical Data Sheet


Extrusion Coating


Tie-Layer, HDPE


Coatings, Protective, Pipe Coating