Lupolen 2420H



Lupolen 2420 H is a non-additivated, low density polyethylene. It is characterized by a good balance between
processability and mechanical properties. Films made from Lupolen 2420 H exhibit good optical properties.
It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.


Africa-Middle East, Asia-Pacific, Europe


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 1.9 g/10 min
Density 0.924 g/cm³
Tensile Modulus 260 MPa
Tensile Stress at Yield 11 MPa
Dart Drop Impact Strength, F50 110 g
Tensile Strength MD 25 MPa
Tensile Strength TD 21 MPa
Tensile Strain at Break MD 250 %
Tensile Strain at Break TD 600 %
Coefficient of Friction >0.8
Failure Energy 4 J/mm
Vicat Softening Temperature (A/50 N) 94 °C
Peak Melting Point 111 °C
Haze (50 µm) <8 %
Gloss (20°) >50
Gloss (60°) >100

Technical Data Sheet

Technical Data Sheet


Blown Film, Cast Film


Low Density Polyethylene


Bags & Pouches, Food Packaging Film, Hygiene Film, Liner Film, Shrink Film