Moplen BA238A is a non-filled copolymer with very high impact strength even at low temperature. Typical customer application is injection molding of bumpers suitable for painting, and applications with high impact resistance.
Moplen BA238A is a non-filled copolymer with very high impact strength even at low temperature. Typical customer application is injection molding of bumpers suitable for painting, and applications with high impact resistance.
Africa-Middle East, Asia-Pacific, Australia and New Zealand
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Melt Flow Rate (230 °C/2.16 kg) | 11 g/10 min |
Density | 0.90 g/cm³ |
Flexural Modulus | 900 MPa |
Tensile Strength at Yield | 19 MPa |
Notched Izod Impact Strength (23 °C) | No Break J/m |
Notched Izod Impact Strength (-20 °C) | 120 J/m |
Rockwell Hardness (R-Scale) | 60 |
Vicat Softening Point | 130 °C |
Deflection Temperature Under Load (0.46 N/mm²) | 95 °C |
Injection Molding
Polypropylene, Impact Copolymer
Exterior Automotive Applications, Interior Automotive Applications