Moplen EP1006



Moplen EP1006 is a heterophasic copolymer with medium flow, used in extrusion and injection molding applications. This grade is nucleated and characterized by a medium stiffness-impact balance also at low temperature combined with low stress whitening. The additive formulation provides a good heat aging resistance.
Moplen EP1006 is typically used by customers requiring a high resistance to temperature degradation, in particular for battery cases and automotive components.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 2 g/10 min
Density 0.90 g/cm³
Flexural Modulus 1350 MPa
Tensile Modulus 1300 MPa
Tensile Stress at Break 7 MPa
Tensile Stress at Yield 26 MPa
Tensile Strain at Break 100 %
Tensile Strain at Yield 8 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 35 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 6 kJ/m²
Vicat Softening Temperature (A50) 149 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 88 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


Polypropylene, Impact Copolymer


Battery Cases