Moplen EP340K is a nucleated impact copolymer suitable for injection moulding and thermoforming applications.
Moplen EP340K exhibits an outstanding low temperature impact performance and good stiffness combined with a good processability.
Moplen EP340K is typically used by customers in luggage, transport and cold storage crates, sports and leisure equipment, toys and typical consumer components which are subjected to impact and/or low temperature.
Moplen EP340K
Description
Availability
Africa-Middle East, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 4 g/10 min |
| Density | 0.90 g/cm³ |
| Tensile Modulus | 1100 MPa |
| Tensile Stress at Yield | 20 MPa |
| Tensile Strain at Break | >50 % |
| Tensile Strain at Yield | 5 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 66 kJ/m² |
| Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) | 13 kJ/m² |
| Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) | 7 kJ/m² |
| Ductile/Brittle Transition Temperature | -57 °C |
| Ball Indentation Hardness | 46 MPa |
| Vicat Softening Temperature (A50) | 140 °C |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 85 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding, Thermoforming
Resin
Polypropylene, Impact Copolymer
Applications
Caps & Closures, Crates, Luggage, Sports, Leisure & Toys