Moplen EP400M is a polypropylene impact copolymer with optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage, good weld strength in battery casing. Typical applications include moulding of parts for electrical appliances, containers, battery casing.
Moplen EP400M
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 9 g/10 min |
| Density | 0.90 g/cm³ |
| Flexural Modulus | 1100 MPa |
| Tensile Strength at Yield | 27 MPa |
| Tensile Elongation at Yield | 6 % |
| Notched Izod Impact Strength (23 °C) | 150 J/m |
| Notched Izod Impact Strength (-20 °C) | 60 J/m |
| Rockwell Hardness (R-Scale) | 90 |
| Vicat Softening Point | 150 °C |
| Deflection Temperature Under Load (0.46 N/mm²) | 100 °C |
Technical Data Sheet
Technical Data Sheet - ASTMProcess
Injection Molding
Resin
Polypropylene, Impact Copolymer
Applications
Appliances, Battery Cases, Containers