Moplen HP548N is a polypropylene homopolymer with medium melt flow rate, used in injection molding applications.
Moplen HP548N exhibits good stiffness and flowability. It is nucleated, for improved productivity and lower cycle times. Its antistatic additivation ease demolding and prevents dust deposits.
Typical applications of Moplen HP548N are caps, closures, containers and housewares.
Moplen HP548N
Description
Availability
Africa-Middle East, Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 11 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Tensile Modulus | 1800 MPa |
| Tensile Stress at Yield | 36 MPa |
| Tensile Strain at Break | >50 % |
| Tensile Strain at Yield | 9 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 4 kJ/m² |
| Ball Indentation Hardness (H 358/30) | 71 MPa |
| Vicat Softening Temperature (A50) | 154 °C |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 105 °C |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene, Homopolymer
Applications
Caps & Closures, Housewares