The Petrothene GA1832 resin is a pelletized linear low density polyethylene selected by customers for applications that require maximum strength and toughness. This product offers excellent additive homogeneity, requires no transfer equipment modification, and facilitates clean and safe handling. Typical applications include cast stretch film for pallet utilization.  The GA1832 resin offers enhanced film strength, drawdown, toughness, and heat seal strength.


Asia-Pacific, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 3.2 g/10 min
Base Resin Density (23 °C) 0.918 g/cm³
Product Density (23 °C) 0.918 g/cm³
Dart Drop Impact Strength, F50 104 g
Tensile Strength at Break MD 5670 psi
Tensile Strength at Break MD 39 MPa
Tensile Strength at Break TD 3340 psi
Tensile Strength at Break TD 23 MPa
Tensile Elongation at Break MD 481 %
Tensile Elongation at Break TD 735 %
1% Secant Modulus MD 24400 psi
1% Secant Modulus MD 168 MPa
1% Secant Modulus TD 178 MPa
1% Secant Modulus TD 25800 psi
Elmendorf Tear Strength MD 309 g
Elmendorf Tear Strength TD 764 g
Haze 1.4 %
Gloss (45°) 75 %
Slip None ppm
Antiblock None ppm

Technical Data Sheet

Technical Data Sheet


Cast Film, Sheet and Profile Extrusion


Linear Low Density Polyethylene


Cast Stretch Film For Pallet Utilization