Pro-fax 6329



Pro-fax 6329 polypropylene homopolymer is available in pellet form.  This resin is typically used in injection molding applications and offers good resistance to aging at elevated temperatures in both wet and dry environments.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 14 g/10 min
Density (23 °C) 0.90 g/cm³
Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) 170000 psi
Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) 1170 MPa
Tensile Strength at Yield (2 in/min) 4600 psi
Tensile Strength at Yield (50 mm/min) 32 MPa
Tensile Elongation at Yield 13 %
Notched Izod Impact Strength (73 °F, Method A) 0.7 ft-lb/in
Notched Izod Impact Strength (23 °C, Method A) 37 J/m
Deflection Temperature Under Load (66 psi, Unannealed) 205 °F
Deflection Temperature Under Load (0.45 MPa, Unannealed) 96 °C

Technical Data Sheet

Technical Data Sheet - ASTM


Injection Molding


Polypropylene, Homopolymer


Caps & Closures