Pro-fax PH350



Pro-fax PH350 general-purpose polypropylene homopolymer is available in spherical particle form. This resin has very minimal stabilization, which allows wide design latitude in compounding applications. Additional stabilization is required to protect the resin during melt processing and throughout its useful life.

Please note that any additives compounded into this resin will require a re-assessment of its FDA status.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 3.5 g/10 min
Density (23 °C) 0.90 g/cm³
Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) 200000 psi
Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) 1380 MPa
Tensile Strength at Yield (2 in/min) 4800 psi
Tensile Strength at Yield (50 mm/min) 33 MPa
Tensile Elongation at Yield 12 %
Notched Izod Impact Strength (73 °F, Method A) 1.0 ft-lb/in
Notched Izod Impact Strength (23 °C, Method A) 53 J/m
Deflection Temperature Under Load (66 psi, Unannealed) 190 °F
Deflection Temperature Under Load (0.45 MPa, Unannealed) 88 °C

Technical Data Sheet

Technical Data Sheet - ASTM




Polypropylene, Homopolymer


Colour Concentrates, Polymer Modifier, Wood Composites