Purell EP374M

LyondellBasell

Description

Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Distributor or your local Lyondellbasell contact.
Purell EP374M is a nucleated polypropylene impact copolymer suitable for use in injection molding applications.
Purell EP374M exhibits an excellent balance of stiffness and low – temperature toughness.
Purell EP374M is typically used in injection molding applications to produce medical products where high mechanical properties are required.

Availability

Africa-Middle East, Asia-Pacific, Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 7.5 g/10 min
Density 0.90 g/cm³
Tensile Modulus 1050 MPa
Tensile Stress at Yield 21 MPa
Tensile Strain at Break >50 %
Tensile Strain at Yield 6 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 45 kJ/m²
Charpy Impact Strength - Notched (0 °C, Type 1, Edgewise, Notch A) 9 kJ/m²
Charpy Impact Strength - Notched (-20 °C, Type 1, Edgewise, Notch A) 7 kJ/m²
Ductile/Brittle Transition Temperature -55 °C
Ball Indentation Hardness (H 358/30) 46 MPa
Vicat Softening Temperature (A/50 N) 144 °C
Deflection Temperature Under Load (0.45 MPa, Unannealed) 80 °C

Technical Data Sheet

Technical Data Sheet

Process

Injection Molding


Resin

Polypropylene, Impact Copolymer


Applications

Healthcare Applications