Purell GB 7250



Purell GB7250 is an HDPE material which exhibits good flowability and high rigidity behaviours.

Exceptional organoleptic properties and a good balance of stiffness, toughness and processability make Purell GB7250 the choice of customers for the production of closures for still mineral water and many other types of food and non-food caps and closures (incl. hinge caps) as well as tube shoulders.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 10 g/10 min
Melt Flow Rate (190 °C/5.0 kg) 28 g/10 min
Density 0.952 g/cm³
Tensile Modulus 1000 MPa
Tensile Stress at Yield 24 MPa
Tensile Strain at Yield 10 %
FNCT (6.0 MPa, 2% Arkopal N100, 50 °C) 2 hr
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 2.5 kJ/m²
Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) 2 kJ/m²
Shore Hardness (Shore D) 61
Ball Indentation Hardness (H 132/30) 46 MPa
Vicat Softening Temperature (B50) 64 °C

Technical Data Sheet

Technical Data Sheet


Injection Molding


High Density Polyethylene


Caps & Closures, Caps & Closures (Healthcare), Collapsible Tubes, Healthcare Applications, Medical Devices