Purell HP671T



Purell HP671T is a nucleated polypropylene homopolymer with a gamma – ray stabilizing additivation for usage in injection molding applications.
Purell HP671T  exhibits very high stiffness combined with an excellent transparency.
Purell HP671T is typically used in rigid, high transparency pharmaceutical and diagnostic applications.
All potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Lyondellbasell reference or your local Distributor.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 55 g/10 min
Density (23 °C) 0.90 g/cm³
Tensile Modulus 1900 MPa
Tensile Stress at Yield 39 MPa
Tensile Strain at Break 16 %
Tensile Strain at Yield 7.5 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 2.6 kJ/m²
Ball Indentation Hardness (H 358/30) 72 MPa
Vicat Softening Temperature (A50) 155 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 105 °C
Haze (1 mm - injection molded disc) 18 %
Gloss (45°) 125

Technical Data Sheet

Technical Data Sheet


Injection Molding


Polypropylene, Homopolymer


Diagnostic Applications, Healthcare Applications, Labware, Medical Devices, Syringes