Purell PE GF 4750



Purell PE GF4750 is a high density polyethylene with a good ESCR, containing antioxidants and delivered in pellet form. The grade is used by our customers for small blow mouldings and tubes for packaging of consumer goods, surfactants, detergents as well as pharmaceuticals.


Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.4 g/10 min
Melt Flow Rate (190 °C/5.0 kg) 1.5 g/10 min
Melt Flow Rate (190 °C/21.6 kg) 30 g/10 min
Density 0.950 g/cm³
Tensile Modulus 1000 MPa
Tensile Stress at Yield 23.0 MPa
Tensile Strain at Yield 10 %
FNCT (6.0 MPa, 2% Arkopal N100, 50 °C) 65 hr
FNCT (4.0 MPa, 2% Arkopal N100, 80 °C) 9 hr
Charpy Impact Strength - Notched (23 °C, Type 1, Notch A) 12.0 kJ/m²
Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) 5.5 kJ/m²
Shore Hardness (Shore D) 60
Ball Indentation Hardness (H 132/30) 44 MPa
Vicat Softening Temperature (B50) 70 °C

Technical Data Sheet

Technical Data Sheet


Blown Film, Extrusion Blow Molding, Injection Blow Molding, Injection Molding


High Density Polyethylene


Bottles and Vials, Caps & Closures, Caps & Closures (Healthcare), Collapsible Tubes, Collapsible Tubes (Healthcare), Diagnostic Applications, Healthcare Applications, Medical Film