Sequel 1440 FP GREY AU



Sequel 1440 FP GREY AU engineered polyolefin material is typically used for large automotive exterior applications that require ductile impact properties at low temperatures, excellent paintability, and processability.


North America


SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 22 g/10 min
Density (23 °C) 0.94 g/cm³
Flexural Modulus (23 °C, 2 mm/min) 1400 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 22 MPa
Notched Izod Impact Strength (23 °C) 28 kJ/m²
Mold Shrinkage


Injection Molding


Polypropylene Compounds


Automotive Parts, Bumpers, Exterior Automotive Applications

Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications